Reviews
Reviews
4.9
(805)
Proudly American
Location:
Trust The Colony Restoration Pro for mold remediation in The Colony and nearby Stewart Peninsula, The Legends, and The Tribute. We inspect first, contain the growth, and test the air after removal so you know the space is clear before we walk off site.
Our mold remediation in The Colony traces the source and verifies clean air after removal.
24/7
Emergency Mold Response
100%
Satisfaction guarantee
17+
Years of experience
60min
Within an hour arrival
At The Colony Restoration Pro, our mold and remediation services The Colony team traces the moisture source before containment goes up, because growth that returns after removal was never fully addressed. Our crews have remediated more than two thousand residential and commercial properties over 17 years of field work. A BBB A+ rating and hundreds of five-star reviews from area property owners back the standard we hold every job to. No specialist reaches a customer site without passing a hands-on containment and clearance exam first. We test the air after removal to confirm the space is clean before closing the job.
What to expect:
Call Now
Get dependable mold damage restoration services in The Colony, TX. Our skilled team addresses mold-affected areas, removes damaged materials, cleans surfaces, and restores your property with efficient solutions designed to improve safety, cleanliness, and overall indoor comfort.
Choose The Colony Restoration Pro over other mold remediation companies backed by decades of expert experience. We deliver thorough environmental inspections, friendly communication, and complete customer satisfaction, ensuring your indoor air quality and property are safely restored.
800
+Satisfied Customers
Comparing mold remediation companies near me in The Colony? The Colony Restoration Pro answers 24/7 and backs every job with clearance testing. Call (469) 529-6914 for immediate help.
Connect With Your Local The Colony Mold Remediation Team
Killing the mold you can see does nothing if the moisture behind it stays, which is why real mold eradication starts with the water and not the wall. The Colony Restoration Pro runs a full mold remediation service for homes and businesses in The Colony, built on containment and verification rather than a quick scrub. We inspect first and remove under seal, then test to confirm the count is back to normal. Each job below targets a different way mold takes hold. The sections cover the ones we see most.
You cannot remediate what you have not found, and mold hides in wall cavities and under flooring where nothing shows on the surface. Our team provides mold inspection in The Colony using thermal imaging and moisture meters to trace the growth out to its edge. A five-square-foot patch on the surface is often ten times that size once we open the drywall behind it. We pull air and surface samples where the readings point to hidden growth, then send them to an independent lab. That report sets the scope before any removal starts, so the cleanup is priced to the real problem rather than a guess. Homeowners who search mold inspections near me get a written report that maps where the mold sits and what feeds it.
Black mold earns its reputation because it feeds on the cellulose in drywall and wood and can trigger breathing problems over time. The Colony Restoration Pro handles black mold remediation in The Colony with lab testing to confirm the species, since color alone never does. As part of our fire water mold restoration services, black mold abatement calls for stricter containment and full-face respirators than routine growth. We seal the area under negative air and pull out the contaminated material before treating the surfaces that stay. EPA-registered fungicides go on the framing rather than the bleach that leaves the roots alive behind the wall. Clearance testing closes the job with proof the spore count has dropped back to a safe indoor level.
Abatement is the term for large-scale mold removal, the kind a whole-house or commercial infestation calls for. At The Colony Restoration Pro, we provide mold abatement services in The Colony when the growth has spread past a single room. Unlike smaller mold abatement companies, we run the containment and the rebuild with one crew, so you are not juggling two contractors on the same job. We stage the removal in zones to keep the clean rooms clean while the work runs next door. Negative air machines and sealed barriers hold the spores inside the work area until each zone tests clear. A written scope lays out the timeline back to a usable space before we start.
Mold needs moisture more than anything else, so controlling the damp is what keeps it from coming back. Our crews handle moisture and mold remediation in The Colony by fixing the humidity problem alongside the growth. We trace the leak or the condensation feeding the mold and stop it at the source. Dehumidifiers and better airflow hold the space below the moisture level mold needs to spread. We meter the walls and slab to confirm the readings sit under that line before we call it done. Treating the damp is the step a surface cleanup always skips, which is why sprayed-over mold returns within weeks. Our water damage restoration services complement this work by addressing the underlying moisture issues that fuel mold growth.
Call Us 24/7
Email Us
The Colony is a city in Denton County, Texas, United States, and a suburb of Dallas. The population was 44,534 at the 2020 census. The Colony derives its name from the original Peters Colony. The Peters Colony headquarters was located within the current boundaries of The Colony in the historical community of Stewartsville and the site of the Hedgcoxe War.
Mold remediation cost depends on the size of the growth and where it hides, since wall-cavity and HVAC jobs cost more to reach. Mold abatement cost on a whole-house infestation runs far above a single bathroom patch. The ranges below cover inspection through clearance.
| Service | Typical Cost Range |
|---|---|
| Mold inspection and testing | $250 to $800 |
| Small remediation, under 10 sq ft | $500 to $1,500 |
| Standard mold remediation | $10 to $25 per sq ft |
| Wall-cavity or HVAC remediation | $15 to $30 per sq ft |
| Black mold remediation | 25% to 50% above standard |
| Containment and HEPA filtration | $500 to $2,000 |
| Post-remediation clearance testing | $200 to $600 |
Mold traced to a sudden covered event, like a pipe that burst overnight, is usually part of your claim. The Colony Restoration Pro logs the moisture source and the growth from the first inspection, with the photos and readings an adjuster expects. We include the lab and clearance results carriers ask for on a mold claim. We bill your insurer directly for the covered scope. Mold left to grow from an ignored leak is often excluded, and we tell you honestly where your loss falls. You handle the household, and we handle the file.
Get Help With Your ClaimWe start emergency drying the same day you call.
We file your claim directly with your carrier.
Moisture readings, photos, and details your adjuster needs.
You approve the scope and your out-of-pocket cost stays clear.
At The Colony Restoration Pro, We provide specialized restoration services in The Colony, TX, including water damage, fire damage, and mold remediation. Fast, reliable, and certified. Explore our core services below:
You call (469) 529-6914 to request help. Our dispatch team sends a crew to your The Colony property right away.
Technicians scan for hidden moisture and sample the air to confirm the growth. The results set the exact scope before removal begins.
Crews seal the work zone and run HEPA scrubbers under negative air. This keeps spores from spreading to rooms the mold never reached.
We take out the mold-eaten drywall and materials too far gone to save. Bagging them on site keeps the spread in check.
Our HEPA vacuuming mold remediation step captures the fine spores that settle during removal. We follow it with an antimicrobial on every surface that stays and dry the structure so the mold has nothing left to feed on.
We confirm the air is clean with post-remediation testing. You receive the full documentation for your records and your claim.
We answer calls 24/7 and get a crew out to your The Colony property the same day in most cases. Mold spreads fastest while the material stays damp, so the sooner we inspect, the smaller the removal. If the growth traces to an active leak, we stop the water on that first visit before it feeds the mold any further.
Keep people and pets out of the affected room and shut the door to slow the spores from drifting into clean areas. Turn off any HVAC unit that pulls air through the moldy space, since the ducts carry spores across the whole property. Leave the growth alone rather than wiping or spraying it, because disturbing mold releases spores and spreads the problem you are trying to contain.
Most residential jobs run three to five days from containment through clearance testing. A single room caught early can finish in about two days, while growth across several rooms or inside the HVAC runs longer. We give you a firm timeline after the inspection, once we can see how far the mold reached behind the walls.
Not for most jobs. We seal the work area under negative air so the rest of the home stays livable while the crew runs. For heavy black mold or growth in a shared air system, we may ask you to stay clear of certain rooms until clearance testing confirms they are safe. We tell you which spaces stay open before we start.
Not when the moisture behind it is fixed. Mold returns only when the leak, condensation, or humidity that fed it gets left in place, so we stop the water source as part of the job rather than treating the stain alone. We dry the structure to a measured target and confirm it with meter readings before we close the walls.
Every job ends with clearance testing by an independent lab, not our own say-so. The test confirms the spore count is back to a normal indoor level and gives you written proof for your records or a future sale. You get the full report along with the photos and moisture logs from the work.
Sometimes, when the growth is caught early and sits on the surface. Once mold soaks into porous drywall or insulation, that material has to come out, since surface treatment leaves the roots alive inside the wall. The inspection tells us which sections can be cleaned and saved and which have to be cut out and replaced.
4.9/5 
805 user rating
